Page 5 - Mitutoyo Fall Promo 2020
P. 5
10% OFF PLUS Complimentary Shipping & Calibration
5% OFF Accessories
*Complimentary accredited calibration applies to orders placed September 1 through September 30, 2020. Mitutoyo America
Mitutoyo America Corporation
965 Corporate Boulevard
Aurora, IL 60502 Certificate of Calibration
888-648-8869 Corporation reserves the right to change or discontinue this offer at any time. This offer is void wherever prohibited or
Company: ABC Company Calibration control no: 123456
Address: 123 Main Street Calibration date: 15-Mar-2018
Springfield, IL 60502 Calibration due date: March 2019
Description: Linear Height QMDATA serial no: 0100141403 Probe model no: 12AAF634 restricted by law. No cash value. Complimentary accredited calibration will be conducted prior to unit shipping and cannot
Model number: LH-600EG Main unit serial no: 0100141403 Measuring range: 0-600 mm
Code number: 518-351A-21 Customer unit ID: MM-0123
Specification Tolerance As-Left Pass/Fail As-Found Pass/Fail
Length Accuracy (1.1+0.6L/600) µm See below Pass New ---
Perpendicularity 5 µm 1.2 Pass New --- be applied toward previously placed orders. Refer to our terms and conditions for further details.
Straightness 4 µm 1.3 Pass New ---
Length As-Left As-Found Length As-Left As-Found Length As-Left As-Found Length As-Left As-Found
L Error Error L Error Error L Error Error L Error Error
0.0 0.00 --- 140.0 -0.31 --- 300.0 -0.52 --- 460.0 -0.82 ---
10.0 -0.23 --- 170.0 0.10 --- 330.0 0.73 --- 490.0 0.07 ---
20.0 0.00 --- 180.0 -0.41 --- 340.0 -0.21 --- 500.0 -1.16 --- *Complimentary ground shipping for the 48 contiguous United States. Offer applies to orders placed September 1 through September 30, 2020.
50.0 -0.22 --- 210.0 0.25 --- 370.0 0.70 --- 530.0 -0.21 ---
60.0 -0.02 --- 220.0 -0.34 --- 380.0 0.02 --- 540.0 -0.85 ---
90.0 0.78 --- 250.0 0.14 --- 410.0 0.76 --- 570.0 -0.28 ---
100.0 -0.11 --- 260.0 -0.15 --- 420.0 -0.23 --- 580.0 -0.86 ---
0.99
450.0
---
---
0.39
130.0
0.23
290.0
---
Measured errors in micrometers (um). L in mm. Shaded values are upward measurements. --- 610.0 0.59 * out of tolerance Mitutoyo America Corporation reserves the right to change or discontinue this offer at any time. This offer is void wherever prohibited or restricted
Statements of conformity are based on the test values and the original manufacturer tolerances and when accounting for the
measurement uncertainty using a simple acceptance decision rule. Uncertainty: Length Accuracy: ± (0.50 + 0.9L/1000) µm,
Perpendicularity: ± (0.77 + 1.5L/1000) µm, Straightness: ± 1.4 µm. The uncertainty represents an expanded uncertainty by law. No cash value. For Alaska and Hawaii special rates apply. Contact us for details. Complimentary shipping cannot be applied toward previously
expressed at approximately a 95% confidence level using a coverage factor of k=2. The uncertainty applies to this
calibration only and not the measurement of customer parts. The errors shown above are test values for verification
purposes only. Traceability is through the National Institute of Standards and Technology - see listed Mitutoyo reference
standards below. NIST No. 683/283809-13. Any number of factors may cause this calibration to drift out of specification
before the requested interval has expired. This calibration was performed at the world-class Mitutoyo Calibration Laboratory.
Customer visits and tours are welcome. Procedure: CLTM-83 Rev. B. Temperature: 20°C ± 0.25°C. This is an endorsed placed orders. Orders may only be shipped to a single address. If customer returns product, they are responsible for the shipping cost. Refer to our terms
accredited calibration certificate (A2LA 0750.01) in accordance to ISO/IEC 17025:2005 and ANSI/NCSL Z540-1-1994. This
one-page certificate shall not be reproduced except in full without the written permission of Mitutoyo America Corporation.
MM123, 1010 mm Checkmaster, s/n 1310007 Cal Date: 21-May-2017 Cal Due Date: May-2018
Reference MM555, Mu-Checker, s/n 98765 Cal Date: 1-Dec-2017 Cal Due Date: Dec-2018 and conditions for further details.
Standards MM321, Ceramic Square, s/n 123455 Cal Date: 1-Nov-2017 Cal Due Date: Nov-2018
COMMENTS
Calibration completed and authorized by: John Doe, Calibration Technician 1 Date issued: 15-Mar-2018
Measurement Examples
ID Runout
Height Max. value Min. value " # C
Part No. Range Resolution Remarks Total Value Promo
64PKA094BCAL 0 - 14”/ 0 - 350mm $4,212.00 $3,591.00
64PKA095BCAL 0 - 24”/ 0 - 600mm 0.001mm / 0.0005mm /.00005” $4,790.00 $4,041.00
64PKA129BCAL 0 - 14”/ 0 - 350mm / .0001” (selectable) Pneumatic $4,712.00 $4,041.00
64PKA130BCAL 0 - 24”/ 0 - 600mm Flotation System $5,290.00 $4,491.00
Optional Accessories
Order No. Description List Promo
12AAC072 DEPTH PROBE $198.00 $188.10
12AAA837 INDICATOR HOLDER (ACCEPTS 3/8” STEM) $144.00 $136.80
12AAA793 PROBE EXTENSION HOLDER (3.3” / 85mm) $161.00 $152.95
226118 SHANK WITH M3 THREAD SCREW $126.00 $119.70
957265 20MM DIA. DISK STYLUS FOR LINEAR HEIGHT $381.00 $361.95
957264 14MM DIA. DISK STYLUS FOR LINEAR HEIGHT $310.00 $294.50
12AAF669 10PI BALL CONTACT POINT(COAXIAL) $235.00 $223.25
957261 2MM DIA. BALL STYLUS FOR LINEAR HEIGHT $211.00 $200.45
517-814 GRAPLATE 36X48" GRADE A $2,794.00 $2,654.30
517-964 GRAPLATE STAND 36X48" $1,206.00 $1,145.70
517-808 GRAPLATE 24X36" GRADE A $1,457.00 $1,384.15
517-956 GRAPLATE STAND 24X36" $1,023.00 $971.85
06AFM380D USB-ITN-D INPUT TOOL DIRECT CABLE $197.00 $187.15
02AZD730G-D U-WAVE TRANSMITTER W/ CONNECTING CABLE (D) $330.00 $313.50
02AZD810D U-WAVE-RECEIVER $499.00 $449.10
12AAA837 12AAC072 02AZD730G-D 02AZD810D
13 18 44 47
55
øA mm type: ø8
inch type: ø3/8”
www.mitutoyo.com
5