Page 8 - Mitutoyo Fall Promo 2020

Indicators

Calculation-Type Digimatic Indicator ID-C

†The ABSOLUTE Digimatic indicator performs internal †Improved parameter setting software makes it even
calculations using the formula Ax+B+Cx-1 (assuming easier to set all of the available parameters and 10%
spindle displacement as x), while the specified coefficients determine and upload the proper coefficients for
A, B and C can be set with respect to the purpose of calculation. (optional) 21EZA313 OFF
measurement or dimensions of the fixtures. This unique
feature allows for reading measurements directly, without
searching for conversions. ENABLED
†Calculation-Type Digimatic Indicator features both a key Data Management Software by Mitutoyo
lock and parameter lock.
†Fast measurement frequency up to 50 per second.
†An analog bar provides easy-to-read values 543-342B
when scanning for Max, Min and TIR Values. www.mitutoyo.com/idccal
VIDEO DEMO
Stem dia. 3/8" #4-48 UNF Thread
Order No. Resolution Range Accuracy Measuring Force List Promo
.00005/.0001/.0005”
543-342B (0.001/0.01mm) .5"/12.7mm ±.00010"/0.003mm 1.5N or less $458.00 $412.20
Selectable
SPC cable – 1m: 905338 2m: 905409
10%

Bore Gage ABSOLUTE Digimatic Indicator ID-C OFF
ENABLED
†Hold automatically picks up hole diameter after a †GO/NO-GO judgment Data Management Software by Mitutoyo
sweep. †Employing the ABSOLUTE linear encoder, the ID-C
†Bore Gage Digimatic Indicator features both a key always displays the spindle Absolute Position from
lock and parameter lock. the origin at power-on.
†Fast measurement frequency up to 50 per second. †Improved parameter setting software makes it even
†An analog bar indicator is integrated to enhance the easier to set all of the available parameters and
intuition in reading. determine and upload the proper coefficients for 543-312B
†Up to three sets of master values and upper/lower calculation. (optional) 21EZA313
tolerance values can be memorized.
Installed on
optional bore Order No. Resolution Range Accuracy Measuring Force List Promo
gage probe
(page 9) .00005/.0001/.0005”
543-312B (0.001/0.01mm) .5"/12.7mm ±.00010"/0.003mm 1.5N or less $458.00 $412.20
Selectable
SPC cable – 1m: 905338 2m: 905409
Peak Hold ABSOLUTE Digimatic Indicator ID-C 15%

With Max./Min. Value Holding Function OFF
†Peak Hold Digimatic Indicator features both a Key Lock †Fast measurement frequency up to 50 per second.
and Parameter Lock. †Employing the ABSOLUTE linear encoder, the Signal ID-C
†An analog bar provides easy-to-read values when always displays the spindle Absolute Position from the
scanning for Max, Min and TIR Values. origin at power-on.
†GO/NO-GO judgment †Improved parameter setting software makes it even easier
†The maximum, minimum or runout value can be to set all of the available parameters and then determine
displayed during measurement. and upload the proper coefficients for calculation.
(optional) 21EZA313
543-302B
Order No. Resolution Range Accuracy Remarks List Promo
Stem dia. 3/8", #4-48 UNF Thread
543-302 .00005/.0001/.0005" .5"/12.7mm ±.00010"/0.003mm w/lug $458.00 $389.30
0.001/0.01mm
543-302B Selectable .5"/12.7mm ±.00010"/0.003mm Flat-back $458.00 $389.30 ENABLED
SPC cable – 1m: 905338 2m: 905409 Data Management Software by Mitutoyo
Prices effective April 19 – June 30, 2021
8